Changing Power Steering Fluid in Your Suzuki Ertiga (Models 2018+)

🔧 Step-by-Step 

1. Cold Engine & Safety

• • Ensure the vehicle is off and cooled down to prevent burns.
  • Optionally, pawl up front wheels to ease hose access.   

2. Remove Old Fluid

• • Extract old fluid from the reservoir using a syringe or turkey baster.
  • Optional: Disconnect the thinner “return” hose to drain remaining fluid into a container. 

3. Cap & Refill

• • Cover the disconnected hose to avoid spills.
  • Refill reservoir up to the “MAX” mark using a funnel. 

4. Cycle Steering

• • Start engine and turn wheel from lock to lock several times to circulate new fluid.
  • Old fluid will discharge from hose—top up reservoir as needed. 

5. Finish & Inspect

• • Once fresh fluid flows, stop engine, reconnect hose, and refill to proper level.
  • Remove jack and inspect for any leaks. 

This guide is intended for informational purposes only. Always refer to your vehicle’s official owner’s manual for specifications and safety instructions. Auto Spares Express and its affiliates are not liable for any damage or injury resulting from improper maintenance or misuse of this information. If in doubt, consult a certified mechanic.